Cobbler是一个快速网络安装linux的服务,而且在经过调整也可以支持网络安装windows。该工具使用python开发,小巧轻便,使用简单的命令即可完成PXE网络安装环境的配置,同时还可以管理DHCP、DNS、以及yum仓库、构造系统ISO镜像。
搭建 Cobbler 无人值守安装服务器
1 环境初始化
Cobbler 服务端:CentOS Linux release 7.6.1810 Cobbler 服务端对内存的要求不高,只要能把Cobbler服务跑起来就行。
#关闭 selinux 和防火墙
[root@Jaking ~]# systemctl stop firewalld.service && systemctl disable firewalld.service && iptables -F && setenforce 0
#永久关闭 selinux 执行下面命令
[root@Jaking ~]# sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
2 安装配置 Cobbler
首先安装 epel-release,Cobbler 和 tftp-server 在 base 源中是没有的
[root@Jaking ~]# yum install -y epel-release
安装 Cobbler 其实有一部分软件会被当做依赖进行安装上去,比如 tftp 和 httpd 服务,我们这里为了方便可以一并安装,避免后续出现相关问题。
[root@Jaking ~]# yum install -y cobbler cobbler-web dhcp tftp-server pykickstart httpd rsync xinetd
注意:必须把yum源配好,否则无法全部安装以上软件!
[root@Jaking ~]# vim /etc/yum.repos.d/CentOS-Base.repo
#在CentOS-Base.repo配置文件中添加以下源
[aliyun-os]
name=aliyun-os
baseurl=https://mirrors.aliyun.com/centos/7/os/x86_64/
enabled=1
gpgcheck=0
[aliyun-epel]
name=aliyun-epel
baseurl=https://mirrors.aliyun.com/epel/7/x86_64/
enabled=1
gpgcheck=0
[aliyun-extra]
name=aliyun-extra
baseurl=https://mirrors.aliyun.com/centos/7/extras/x86_64/
enabled=1
gpgcheck=0
软件作用说明
cobbler #Cobbler 程序包
cobbler-web #Cobbler 的 Web 服务包
pykickstart #Cobbler 检查 kickstart 语法错误
httpd #Apache Web 服务
Cobbler 工作目录介绍
[root@Jaking ~]# ls /etc/cobbler/
auth.conf genders.template named.template secondary.template zone.template
cheetah_macros import_rsync_whitelist power settings zone_templates
cobbler_bash iso pxe tftpd.template
completions ldap reporting users.conf
dhcp.template modules.conf rsync.exclude users.digest
dnsmasq.template mongodb.conf rsync.template version
/etc/cobbler # 配置文件目录
/etc/cobbler/settings # Cobbler 主配置文件,这个文件是 YAML 栺式,Cobbler 是 python 写的程序。
/etc/cobbler/dhcp.template # DHCP服务的配置模板
/etc/cobbler/tftpd.template # tftp 服务的配置模板
/etc/cobbler/rsync.template # rsync 服务的配置模板
/etc/Cobbler/iso # iso 模板配置文件目录
/etc/cobbler/pxe # pxe 模板文件目录
/etc/cobbler/power # 电源的配置文件目录
/etc/cobbler/users.conf # Web 服务授权配置文件
/etc/cobbler/users.digest # 用于 Web 访问的用户名密码配置文件
/etc/cobbler/dnsmasq.template # DNS 服务的配置模板
/etc/cobbler/modules.conf # Cobbler 模块配置文件
/var/lib/cobbler # Cobbler 数据目录
/var/lib/cobbler/config # 配置文件
/var/lib/cobbler/kickstarts # 默认存放 kickstart 文件
/var/lib/cobbler/loaders # 存放的各种引导程序
/var/www/cobbler # 系统安装镜像目录
/var/www/cobbler/ks_mirror # 导入的系统镜像列表
/var/www/cobbler/images # 导入的系统镜像启动文件
/var/www/cobbler/repo_mirror # yum 源存储目录
/var/log/cobbler # 日志目录
/var/log/cobbler/install.log # 客户端系统安装日志
/var/log/cobbler/cobbler.log # Cobbler 日志
首先启动 Cobbler 和 httpd 服务
[root@Jaking ~]# systemctl start cobblerd httpd
检查配置
[root@Jaking ~]# cobbler check
The following are potential configuration items that you may want to fix:
1 : The 'server' field in /etc/cobbler/settings must be set to something other than localhost, or kickstarting features will not work. This should be a resolvable hostname or IP for the boot server as reachable by all machines that will use it.
2 : For PXE to be functional, the 'next_server' field in /etc/cobbler/settings must be set to something other than 127.0.0.1, and should match the IP of the boot server on the PXE network.
3 : change 'disable' to 'no' in /etc/xinetd.d/tftp
4 : Some network boot-loaders are missing from /var/lib/cobbler/loaders, you may run 'cobbler get-loaders' to download them, or, if you only want to handle x86/x86_64 netbooting, you may ensure that you have installed a *recent* version of the syslinux package installed and can ignore this message entirely. Files in this directory, should you want to support all architectures, should include pxelinux.0, menu.c32, elilo.efi, and yaboot. The 'cobbler get-loaders' command is the easiest way to resolve these requirements.
5 : enable and start rsyncd.service with systemctl
6 : debmirror package is not installed, it will be required to manage debian deployments and repositories
7 : The default password used by the sample templates for newly installed machines (default_password_crypted in /etc/cobbler/settings) is still set to 'cobbler' and should be changed, try: "openssl passwd -1 -salt 'random-phrase-here' 'your-password-here'" to generate new one
8 : fencing tools were not found, and are required to use the (optional) power management features. install cman or fence-agents to use them
Restart cobblerd and then run 'cobbler sync' to apply changes.
以上问题我们需要逐步解决。
问题 1:修改 server 地址为 192.168.1.7
[root@Jaking ~]# vim /etc/cobbler/settings
改:390 server: 127.0.1
为:390 server: 192.168.1.7
问题 2:修改 next_server 地址为 192.168.1.7
[root@Jaking ~]# vim /etc/cobbler/settings
改:278 next_server: 127.0.1
为:278 next_server: 192.168.1.7
问题 3:修改 tftp 服务被 xinetd 服务管理
[root@Jaking ~]# vim /etc/xinetd.d/tftp
改:14 disable = yes
为:14 disable = no
顺便修改 xinetd 和 tftpd 服务开机启动
[root@Jaking ~]# systemctl start xinetd tftp && systemctl enable xinetd tftp
问题 4:下载操作系统引导文件
[root@Jaking ~]# cobbler get-loaders
task started: 2020-01-04_031204_get_loaders
task started (id=Download Bootloader Content, time=Sat Jan 4 03:12:04 2020)
downloading https://cobbler.github.io/loaders/README to /var/lib/cobbler/loaders/README
downloading https://cobbler.github.io/loaders/COPYING.elilo to /var/lib/cobbler/loaders/COPYING.elilo
downloading https://cobbler.github.io/loaders/COPYING.yaboot to /var/lib/cobbler/loaders/COPYING.yaboot
downloading https://cobbler.github.io/loaders/COPYING.syslinux to /var/lib/cobbler/loaders/COPYING.syslinux
downloading https://cobbler.github.io/loaders/elilo-3.8-ia64.efi to /var/lib/cobbler/loaders/elilo-ia64.efi
downloading https://cobbler.github.io/loaders/yaboot-1.3.17 to /var/lib/cobbler/loaders/yaboot
downloading https://cobbler.github.io/loaders/pxelinux.0-3.86 to /var/lib/cobbler/loaders/pxelinux.0
downloading https://cobbler.github.io/loaders/menu.c32-3.86 to /var/lib/cobbler/loaders/menu.c32
downloading https://cobbler.github.io/loaders/grub-0.97-x86.efi to /var/lib/cobbler/loaders/grub-x86.efi
downloading https://cobbler.github.io/loaders/grub-0.97-x86_64.efi to /var/lib/cobbler/loaders/grub-x86_64.efi
*** TASK COMPLETE ***
问题 5:修改 rsyncd 服务为开机自启动状态并启用它。
[root@Jaking ~]# systemctl start rsyncd && systemctl enable rsyncd
问题 6:关于 debian 相关部署管理配置,忽略。
debmirror package is not installed, it will be required to manage debian
deployments and repositories # debmirror 包尚未安装,需要它来管理 debian 部署和存储库
问题 7:修改操作系统默认密码
[root@Jaking ~]# openssl passwd -1 -salt 'root' '123456'
$1$root$j0bp.KLPyr.u9kgQ428D10
[root@Jaking ~]# vim /etc/cobbler/settings
改:101 default_password_crypted: "$1$mF86/UHC$WvcIcX2t6crBz2onWxyac."
为:101 default_password_crypted: "$1$root$j0bp.KLPyr.u9kgQ428D10"
注:root 为用户描述,123456 为密码
问题 8:电源管理相关服务,忽略。
fencing tools were not found, and are required to use the (optional) power
management features. install cman or fence-agents to use them
修改完以上配置就可以检查 DHCP 配置了,由于 Cobbler 自动管理 DHCP 服务,我们只需要修改 Cobbler 中的模板配置文件即可。
[root@Jaking ~]# vim /etc/cobbler/dhcp.template
改:22 option routers 192.168.1.5; #修改默认网关地址
为:22 option routers 192.168.1.1; #以实际的网关为准
改:23 option domain-name-servers 192.168.1.1; #修改 DNS 地址
为:23 option domain-name-servers 114.114.114.114;
如下:
21 subnet 192.168.1.0 netmask 255.255.255.0 {
22 option routers 192.168.1.1;
23 option domain-name-servers 114.114.114.114;
24 option subnet-mask 255.255.255.0;
25 range dynamic-bootp 192.168.1.100 192.168.1.254;
26 default-lease-time 21600;
27 max-lease-time 43200;
28 next-server $next_server;
注:配置默认为 192.168.1.0 网段,具体要看你的装机 vlan 划分,现在是实验环境所以保持配不变。 注:默认网关地址为 192.168.1.5,这里需要改成你自己局域网中的网关。 $next_server 为变量值为我们前面修改的主配置文件中的地址 192.168.1.7
修改 Cobbler 管理 dhcp 服务
[root@Jaking ~]# vim /etc/cobbler/settings
改:242 manage_dhcp: 0
为:242 manage_dhcp: 1
同步配置文件,需要先重启 Cobblerd
[root@Jaking ~]# systemctl restart cobblerd
[root@Jaking ~]# cobbler sync
task started: 2020-01-04_032552_sync
task started (id=Sync, time=Sat Jan 4 03:25:52 2020)
running pre-sync triggers
cleaning trees
removing: /var/lib/tftpboot/grub/images
copying bootloaders
trying hardlink /var/lib/cobbler/loaders/pxelinux.0 -> /var/lib/tftpboot/pxelinux.0
trying hardlink /var/lib/cobbler/loaders/menu.c32 -> /var/lib/tftpboot/menu.c32
trying hardlink /var/lib/cobbler/loaders/yaboot -> /var/lib/tftpboot/yaboot
trying hardlink /usr/share/syslinux/memdisk -> /var/lib/tftpboot/memdisk
trying hardlink /var/lib/cobbler/loaders/grub-x86.efi -> /var/lib/tftpboot/grub/grub-x86.efi
trying hardlink /var/lib/cobbler/loaders/grub-x86_64.efi -> /var/lib/tftpboot/grub/grub-x86_64.efi
copying distros to tftpboot
copying images
generating PXE configuration files
generating PXE menu structure
rendering DHCP files
generating /etc/dhcp/dhcpd.conf
rendering TFTPD files
generating /etc/xinetd.d/tftp
cleaning link caches
running post-sync triggers
running python triggers from /var/lib/cobbler/triggers/sync/post/*
running python trigger cobbler.modules.sync_post_restart_services
running: dhcpd -t -q
received on stdout:
received on stderr:
running: service dhcpd restart
received on stdout:
received on stderr: Redirecting to /bin/systemctl restart dhcpd.service
running shell triggers from /var/lib/cobbler/triggers/sync/post/*
running python triggers from /var/lib/cobbler/triggers/change/*
running python trigger cobbler.modules.manage_genders
running python trigger cobbler.modules.scm_track
running shell triggers from /var/lib/cobbler/triggers/change/*
*** TASK COMPLETE ***
注意观察 DHCP 服务是否启动。
重新检查,剩下 2 个可以忽略的问题。
[root@Jaking ~]# cobbler check
The following are potential configuration items that you may want to fix:
1 : debmirror package is not installed, it will be required to manage debian deployments and repositories
2 : fencing tools were not found, and are required to use the (optional) power management features. install cman or fence-agents to use them
Restart cobblerd and then run 'cobbler sync' to apply changes.
导入镜像以及配置
添加镜像
挂载光驱
[root@Jaking ~]# mount /dev/sr0 /mnt
导入镜像(时间较长)
[root@Jaking ~]# cobbler import --path=/mnt/ --name=CentOS-7.6 --arch=x86_64
task started: 2020-01-04_033346_import
task started (id=Media import, time=Sat Jan 4 03:33:46 2020)
Found a candidate signature: breed=redhat, version=rhel6
Found a matching signature: breed=redhat, version=rhel6
Adding distros from path /var/www/cobbler/ks_mirror/CentOS-7.6-x86_64:
creating new distro: CentOS-7.6-x86_64
trying symlink: /var/www/cobbler/ks_mirror/CentOS-7.6-x86_64 -> /var/www/cobbler/links/CentOS-7.6-x86_64
creating new profile: CentOS-7.6-x86_64
associating repos
checking for rsync repo(s)
checking for rhn repo(s)
checking for yum repo(s)
starting descent into /var/www/cobbler/ks_mirror/CentOS-7.6-x86_64 for CentOS-7.6-x86_64
processing repo at : /var/www/cobbler/ks_mirror/CentOS-7.6-x86_64
need to process repo/comps: /var/www/cobbler/ks_mirror/CentOS-7.6-x86_64
looking for /var/www/cobbler/ks_mirror/CentOS-7.6-x86_64/repodata/*comps*.xml
Keeping repodata as-is :/var/www/cobbler/ks_mirror/CentOS-7.6-x86_64/repodata
*** TASK COMPLETE ***
查看镜像,上面是镜像名称,下面是启动菜单。
[root@Jaking ~]# cobbler list
distros:
CentOS-7.6-x86_64
profiles:
CentOS-7.6-x86_64
同步 Cobbler 配置
[root@Jaking ~]# systemctl restart cobblerd
[root@Jaking ~]# cobbler sync
至此,搭建 Cobbler 无人值守安装服务器完成! 接下来只需要在 VMware Workstation Pro 14 上面创建一台 CentOS 系统,网络模式选择桥接即可实现无人值守安装(不需要选择镜像)。
以上就是良许教程网为各位朋友分享的Linux系统相关内容。想要了解更多Linux相关知识记得关注公众号“良许Linux”,或扫描下方二维码进行关注,更多干货等着你 !